INNER MARKER- A marker beacon used with an ILS (CAT II) precision approach located between the middle marker and the end of the ILS runway, transmitting a radiation pattern keyed at six dots per second and indicating to the pilot, both aurally and visually, that he/she is at the designated decision height (DH), normally 100 feet above the touchdown zone elevation, on the ILS CAT II approach. It also marks progress during a CAT III approach.
(See INSTRUMENT LANDING SYSTEM.)
(Refer to AIM.)
INNER MARKER BEACON-
(See INNER MARKER.)
INREQ-
(See INFORMATION REQUEST.)
INS-
(See INERTIAL NAVIGATION SYSTEM.)
INSTRUMENT APPROACH-
(See INSTRUMENT APPROACH
PROCEDURE.)
INSTRUMENT APPROACH PROCEDURE- A series of predetermined maneuvers for the orderly transfer of an aircraft under instrument flight conditions from the beginning of the initial approach to a landing or to a point from which a landing may be made visually. It is prescribed and approved for a specific airport by competent authority.
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
a.
U.S. civil standard instrument approach procedures are approved by the FAA as prescribed under 14 CFR Part 97 and are available for public use.
b..
U.S. military standard instrument approach procedures are approved and published by the Department of Defense.
c..
Special instrument approach procedures are approved by the FAA for individual operators but are not published in 14 CFR Part 97 for public use.
(See ICAO term INSTRUMENT APPROACH
PROCEDURE.)
Pilot/Controller Glossary
INSTRUMENT APPROACH PROCEDURE [ICAO]- A series of predetermined maneuvers by reference to flight instruments with specified protection from obstacles from the initial approach fix, or where applicable, from the beginning of a defined arrival route to a point from which a landing can be completed and thereafter, if a landing is not completed, to a position at which holding or en route obstacle clearance criteria apply.
INSTRUMENT APPROACH PROCEDURES CHARTS-
(See AERONAUTICAL CHART.)
INSTRUMENT DEPARTURE PROCEDURE (DP)- A preplanned instrument flight rule (IFR) departure procedure published for pilot use, in graphic or textual format, that provides obstruction clearance from the terminal area to the appropriate en route structure. There are two types of DP, Obstacle Departure Procedure (ODP), printed either textually or graphically, and, Standard Instrument Departure (SID), which is always printed graphically.
(See IFR TAKEOFF MINIMUMS AND DEPARTURE PROCEDURES.) (See OBSTACLE DEPARTURE PROCEDURES.) (See STANDARD INSTRUMENT DEPARTURES.) (Refer to AIM.)
INSTRUMENT DEPARTURE PROCEDURE (DP) CHARTS-
(See AERONAUTICAL CHART.)
INSTRUMENT FLIGHT RULES- Rules governing the procedures for conducting instrument flight. Also a term used by pilots and controllers to indicate type of flight plan.
|
2002-2021 www.ajkitchenandbath.com 北京藍(lán)天飛行翻譯公司版權(quán)所有 北京藍(lán)天飛行翻譯公司版權(quán)聲明
